Bacopa monnieri (whole plant)
(→HPTLC Association - additional entry) |
|||
Line 30: | Line 30: | ||
Derivatization reagent: Sulfuric acid reagent; Preparation: 20 mL of sulfuric acid 98% in 180 mL of methanol. Use: Dip (time 0, speed 5), heat at 120°C for 3 min. | Derivatization reagent: Sulfuric acid reagent; Preparation: 20 mL of sulfuric acid 98% in 180 mL of methanol. Use: Dip (time 0, speed 5), heat at 120°C for 3 min. | ||
| detection=Saturated chamber; developing distance 70 mm from lower edge; relative humidity 33% | | detection=Saturated chamber; developing distance 70 mm from lower edge; relative humidity 33% | ||
− | | | + | | referencesamples=Reference: Individually dissolve 1 mg of bacoside A3 and 1 mg of asiaticoside in 1 mL of methanol. Optional: Individually dissolve 1 mg each of asiatic acid, madecassic acid, madecassoside, bacopaside, and bacosine in 1 mL of methanol. |
| | | | ||
| lanes= Lanes, from left to right (Track, Volume, Sample): | | lanes= Lanes, from left to right (Track, Volume, Sample): |
Revision as of 13:39, 16 October 2012
Contents |
Introduction
Macroscopic Entries
Microscopic Entries
|
HPTLC Entries
Bacopa (leaf) (Bacopa monnieri) Lane Assignments Lanes, from left to right (Track, Volume, Sample):
Reference Sample(s) Reference: Individually dissolve 1 mg of bacoside A3 and 1 mg of asiaticoside in 1 mL of methanol. Optional: Individually dissolve 1 mg each of asiatic acid, madecassic acid, madecassoside, bacopaside, and bacosine in 1 mL of methanol. Stationary Phase Stationary phase, i.e. Silica gel 60, F254 Mobile Phase Dichloromethane, methanol, water 14:16:1 (v/v/v) Sample Preparation Method Sample: Mix 1.0 g of powdered sample with 10 mL of methanol and sonicate for 10 minutes, then centrifuge or filter the solutions and use the supernatants / filtrates as test solutions. Derivatization reagent: Sulfuric acid reagent; Preparation: 20 mL of sulfuric acid 98% in 180 mL of methanol. Use: Dip (time 0, speed 5), heat at 120°C for 3 min. Detection Method Saturated chamber; developing distance 70 mm from lower edge; relative humidity 33% Other Notes Images presented in this entry are examples and are not intended to be used as a bases for setting specifications for quality control purposes. System suitability test: Bacoside A3: brownish violet zone at Rf ~ 0.48. Asiaticoside: brownish violet zone at Rf ~ 0.30. Identification: Compare result with reference images. The fingerprint of the test solution is similar to that of the corresponding botanical reference sample. Additional weak zones may be present. Under white light the test solution shows a brown zone at the position of reference bacoside A3 and a faint pink zone at the position of reference bacoside at Rf ~ 0.90. In the lower third of the chromatogram there may be several greenish-brown zones. Test for adulteration: No intense zones may be seen between the zone due to bacoside A3 and bacosine (red arrow, Gotu kola herb).
|
Other Points of Interest
Cite error: <ref>
tags exist, but no <references/>
tag was found