Pueraria spp. (root)

From AHPA Botanical Identity References Compendium
Revision as of 21:02, 2 June 2014 by Admin (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

AHPA recognizes other valuable resources exist regarding the identity of Pueraria spp..

To submit a suggestion or contribution, please contact Merle Zimmermann.

Contents

Nomenclature

Botanical Voucher Specimen

bottomright

Pueraria phaseoloides Tropicos 81216 (S).jpg
Pueraria phaseoloides
Source: MOBOT, Tropicos.org[1]

Organoleptic Characteristics

Macroscopic Characteristics

Microscopic Characteristics

High Performance Thin Layer Chromatographic Identification

HPTLC-assoc-Logo-farbig-Text-schwarz-300x47.png
(thumbnail)
Kudzu root, ge gen (root) HPTLC ID - UV 254 nm

Kudzu root, ge gen (root) (Pueraria montana var. lobata)

Lane Assignments Lanes, from left to right (Track, Volume, Sample):

  1. 7 µL Kudzu root #1
  2. 7 µL Kudzu root #2
  3. 7 µL Kudzu root #3
  4. 7 µL Kudzu root #4
  5. 7 µL Kudzu root #5
  6. 7 µL Puerarin
  7. 7 µL Daidzin, Daidzein (with increasing Rf)
  8. 7 µL Kudzu root #6
  9. 7 µL Thomson’s kudzu root #1
  10. 7 µL Thomson’s kudzu root #2
  11. 7 µL Kudzu root #7 (mislabeled)
  12. 7 µL Thomson’s kudzu root #3
  13. 7 µL Thomson’s kudzu root #4
  14. 7 µL Thomson’s kudzu root #5
  15. 7 µL Thomson’s kudzu root #6 

Reference Sample(s) Reference: Dissolve 1 mg of daidzin and 1 mg of puerarin individually in 1 mL of methanol. Optional: Dissolve 1 mg of daidzein in 1 mL of methanol. 

Stationary Phase Stationary phase, i.e. Silica gel 60, F254 

Mobile Phase Dichloromethane, ethyl acetate, methanol, water 20:40:22:10 (v/v/v/v)--NOTE: to avoid the formation of two phases respect this order when mixing the mobile phase. 

Sample Preparation Method Sample: Mix 500 mg of powdered sample with 5 mL of methanol and sonicate for 10 minutes, then centrifuge or filter the solutions and use the supernatants / filtrates as test solutions. 

Detection Method Saturated chamber; developing distance 70 mm from lower edge; relative humidity 33% 

Other Notes Images presented in this entry are examples and are not intended to be used as basis for setting specifications for quality control purposes.

System suitability test: Puerarin: dark quenching zone at Rf ~ 0.48; Daidzin: dark quenching zone at Rf ~ 0.51

Identification: Compare result with reference images. The fingerprint of the test solution is similar to that of the corresponding botanical reference sample. Additional weak zones may be present. The chromatogram of the test solution shows intense quenching zones corresponding to reference substances puerarin and daidzin (red arrows). Below the zone corresponding to puerarin there are at least 5 quenching zones of medium intensity (orange arrow). Above the zone corresponding to daidzin there are 1 to 2 distinct quenching zones. At Rf ~ 0.75 there is a weak zone corresponding to reference standard daidzein.

Test for other species: The chromatogram of Thomson’s kudzu root shows only two weak quenching zones corresponding to reference substances puerarin and daidzin.


Source: HPTLC Association [2]


HPTLC-assoc-Logo-farbig-Text-schwarz-300x47.png
(thumbnail)
Thomson’s kudzu root, gen ge (root) HPTLC ID - UV 254 nm

Thomson’s kudzu root, gen ge (root) (Pueraria montana var. chinensis)

Lane Assignments Lanes, from left to right (Track, Volume, Sample):

  1. 7 µL Kudzu root 1
  2. 7 µL Kudzu root 2
  3. 7 µL Kudzu root 3
  4. 7 µL Kudzu root 4
  5. 7 µL Kudzu root 5
  6. 7 µL Puerarin
  7. 7 µL Daidzin, Daidzein (with increasing Rf)
  8. 7 µL Kudzu root 6
  9. 7 µL Thomson’s kudzu root 1
  10. 7 µL Thomson’s kudzu root 2
  11. 7 µL Kudzu root 7 (mislabeled)
  12. 7 µL Thomson’s kudzu root 3
  13. 7 µL Thomson’s kudzu root 4
  14. 7 µL Thomson’s kudzu root 5
  15. 7 µL Thomson’s kudzu root 6 

Reference Sample(s) Reference: Dissolve 1 mg of daidzin and 1 mg of puerarin individually in 1 mL of methanol. Optional: Dissolve 1 mg of daidzein in 1 mL of methanol. 

Stationary Phase Stationary phase, i.e. Silica gel 60, F254 

Mobile Phase Dichloromethane, ethyl acetate, methanol, water 20:40:22:10 (v/v/v/v); NOTE: to avoid the formation of two phases respect this order when mixing the mobile phase. 

Sample Preparation Method Sample: Mix 500 mg of powdered sample with 5 mL of methanol and sonicate for 10 minutes, then centrifuge or filter the solutions and use the supernatants / filtrates as test solutions. 

Detection Method Saturated chamber; developing distance 70 mm from lower edge; relative humidity 33% 

Other Notes Images presented in this entry are examples and are not intended to be used as basis for setting specifications for quality control purposes.

System suitability test: Puerarin: dark quenching zone at Rf ~ 0.48; Daidzin: dark quenching zone at Rf ~ 0.51.

Identification: Compare result with reference image. The fingerprint of the test solution is similar to that of the corresponding botanical reference sample. Additional weak zones may be present. The chromatogram of the test solution shows weak quenching zones corresponding to reference standards puerarin and daidzin (black arrows). Below the zone corresponding to puerarin there are no or only very weak quenching zones. At Rf 0.75 there may be a weak zone corresponding to reference standard daidzein.

Test for other species: No intense zone is seen between the zone corresponding to puerarin and the start position (red arrow, Kudzu root).


Source: HPTLC Association [3]

Supplementary Information

Sources

  1. MOBOT, Tropicos.org http://www.tropicos.org/Image/81216
  2. HPTLC Association http://www.hptlc-association.org/
  3. HPTLC Association http://www.hptlc-association.org/
Personal tools
MediaWiki Appliance - Powered by TurnKey Linux